erc_mini_sdx_b

ERC Mini SDX
Add to cart
  • Description
  • More

Included with ERC Mini SDX are:

  • Assembled and tested PC board
  • USB cable.  Unit is powered +5 VDC from USB port.  Does not require 12VDC power.
  • Software calibration tool for Windows XP/Vista/7/8/10 32 and 64 bit
  • ERC rotator control software for Windows XP/Vista/7/8/10 32 and 64 bit

SPECIFICATIONS

  • PC board size : 2.63 x 1.48 inches (67 x 37.5 mm)
  • Supply voltage : 5VDC via USB, max 10 mA
  • Operating temperature : 0 to 70° C
  • Software driven calibration
  • Full support for rotators with overlap up to 180°
  • Security stop, if the rotator does not move

 

Relay circuits:

  • CW/CCW : each 2xON/OFF (DPDT) max 50VAC/3A or 30VDC/2.5A
  • AUX : 1xON (SPST) max. 250VAC at 3A

Communication port:   USB (FTDI-chip), Baud rate configurable 4800-9600

ERC Mini SDX is compatible to a subset of the following protocols:

  • Hygain DCU-1 with extension for position feedback
  • Yaesu GS232A
  • Yaesu GS232B


Firmware supported features

  • Delay before rotator starts moving
  • Programmable end stops
  • Antenna offset
  • Support of overlap up to 180 degrees
  • Speed function