Extend your existing 40 ft Spiderbeam® pole to a HD 46 ft pole with this conversion kit.
Adds the bottom 3 segments of the 46 ft pole to an exisiting 40 ft pole. The bottom segment from the original pole is discarded and replaced with a new segment plus 2 larger ones below it. This makes an existing 40 ft pole the same as the new 46 ft HD version. 2 additional clamps and clamp material are provided to extend the 40 ft clamp kit for the new height plus a second guy strap that goes lower on the pole adding to the original guy belt near the top of the pole. Original top guy belt not provided with conversion kit. Order standard 12m/40 ft guybelt if top guy belt is needed. 2 new rubber end caps provided.
After installation of the extension kit, the pole is now equivalent to the 46 ft HD version.
Specifications after installation of kit:
- full extended height 45 ft 11 inches (14 meters)
- collapsed transport length, 3 ft 11 inches
- weight 11 pounds 9 ounces. With clamp kit and guy belt installed 13 pounds
- bottom diameter 2 9/16". With bottom rubber cap installed, 3 inches
- top diameter 5/16"
- wall thickness 1.4mm top, 2.2 mm bottom
- number of segments, 14
- material, fiberglass, black, UV-resistant, multi-layered specifically reinforced windings
