NEW! Spiderbeam® 46ft /14m HD fiberglass pole. Bigger, stronger, larger than the standard 40 ft pole.
The 46 ft pole adds the 2 larger segments used on the new 40 ft / 12m XHD Xtra Heavy Duty pole to the bottom of a standard 40 ft pole to form a larger, more robust 46 ft pole. (own a standard 40 ft pole already? There is an upgrade extension kit available).
Top segment diameter is 5/16 inch, bottom outside diameter 2 and 9/16 inches (3 inches with rubber end cap installed). Top segment is either hollow or has a wire tie eyelet installed at the top depending on pole model.
Specially reinforced winding method for fiberglass like all Spiderbeam® poles with many layers of fiberglass would in alternating directons lengthwise and crosswise. Stronger joints have been achieved by significantly increasing the overlap between individual tube segments.
Poles can also be used at shorter heights, simply remove segments out of the bottom of the pole before putting it up to use at a lower height.
Guy belt and clamp kit included as standard accessories with the 46 ft pole.
These poles are suitable for permanent installations. Fiberglass is coated with black UV resistant paint. Glossy at application, long term exposure to weather will turn it a more matte looking finish. They can be left outside for many years without effect.
Specifications:
- full extended height 45 ft 11 inches (14 meters)
- collapsed transport length, 3 ft 11 inches
- weight 11 pounds 9 ounces. With clamp kit and guy belt installed 13 pounds
- bottom diameter 2 9/16". With bottom rubber cap installed, 3 inches
- top diameter 5/16"
- wall thickness 1.4mm top, 2.2 mm bottom
- number of segments, 14
- material, fiberglass, black, UV-resistant, multi-layered specifically reinforced windings
