33ft HD aluminum mast. Larger heavy duty version for additional weight load capacity. Use the mast at full height of 33ft with up to 26 lbs attached at the top.
The individual sections are interlocked with strong high quality stainless steel clamps with 8mm allen screws. An 8mm allen wrench is supplied with the mast and no further tools are necessary. The mast should be guyed at one or two levels. For quick portable use, we also sell a knob screw kit. The knobs install in place of the 8mm allen bolts on the clamps and allow the mast to be quickly taken up or down. Knobs are not suitable for permanent installations.
The mast can be rotated by hand or a light duty rotator like Yaesu G-450 can be placed at the bottom to turn the whole mast.
Guy hardware allows the mast to be guyed in 3 or 4 directions. Slip-ring guy hardware allows the mast to rotate inside the guy hardware. Rotor adapters (70/50mm) are available as the base of the mast is too large to fit any commercial Amateur Radio rotator clamp opening directly. Turn the entire mast and antenna from a base mounted rotor.
Antenna can be mounted directly to the mast or with optional 45mm standpipe that fits onto the top of the top section of the mast.
Click here for graphic representation of guying for the 33ft HF mast
Click here to see the guy placement and dimensions for individual masts (metric)
Aluminum HD telescopic push-up mast 10m (33ft) |
| fully extracted length (height) | 33ft (10m) |
| transportation length | 5ft 7" (1.7m) |
weight | 23 lbs (10.5kg) |
| bottom diameter | 2 3/4" (70mm) |
| top diameter | 1 1/2" (40mm) |
| wall thickness | 1/12" (2mm) |
| number of segments | 7 |
| pole material | high quality anodized aluminium withstrong interlock clamps made from stainless steel |
maximum useable heights |
| up to 26 lbs load weight | extend mast to full height of 33ft |
| |
